| Electrical Performance |
| Contact Resistance | Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground | 500 M MIN |
| Withstanding Voltage | Mate applicable FPC/FFC, 200V AC (RMS) for 1 minute between adjacent terminals or ground | No Breakdown |
| Mechanical Performance |
| Locking Force | 0.3mm thick FFC, 253mm/min speed | 1.96 * n (N) MAX |
| Withdrawal Force | 0.3mm thick FFC, 253mm/min speed | 0.49 * n (N) MIN |
| Terminal/Housing Retention Force | Pull terminal at 253mm/min speed | 3.92 N MIN |
| Environmental Performance and Others |
| Repeated Insertion and Withdrawal | 20 cycles, < 10 cycles/min | Contact Resistance 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX |
| Vibration | Amplitude 1.5mm, 10-55-10Hz/min, 2 hours per axis (X,Y,Z) | Discontinuity 1 ms MAX |
| Shock | 490m/s {50G}, 3 strokes per axis (X,Y,Z) | Discontinuity 1 ms MAX |
| Heat Resistance | 852, 96 hours | Contact Resistance 60 m MAX |
| Cold Resistance | -402, 96 hours | Contact Resistance 60 m MAX |
| Humidity | 402, 90-95% RH, 96 hours | Insulation Resistance 20 M MIN |
| Temperature Cycling | 5 cycles (-45 30min, 85 30min) | Contact Resistance 60 m MAX |
| Salt Spray | 352, 51% salt solution, 48 hours | Contact Resistance 60 m MAX |
| SO2 Gas | 402, 505ppm SO2, 24 hours | Contact Resistance 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas from 28% Ammonia solution | Contact Resistance 60 m MAX |
| Solderability | 20.5 sec in 2355 tin bath (0.2mm from tip) | Wetting Area 95% |
| Resistance to Soldering Heat | 50.5 sec in 2605 tin bath (0.2mm from tip) | No damage or deformation |
