| Sign In | Join Free | My entremaqueros.com |
|
Description : Heavy Duty Connector Housings, Hoods, Bases RoHS
MOQ : 8
Brand Name : 1852956
Delivery Time : 8-16工作日
Model Number : 1852956
Packaging Details : -
This sleeve housing from the VARIOCON product family, specifically the VC3 design, is constructed from gray polyamide. It is suitable for applications in plant, controller, and electrical device engineering. When using fiber optics, the bending radii of the cable manufacturers must be observed. For outdoor applications, the connectors must be separately protected against environmental influences. Assembled products must not be manipulated or improperly opened. Only use mating connectors specified in the technical data. Conductive connector housings must be grounded for operating voltages > 50 V AC. Ensure protective or functional ground is properly connected. Applicable when combining several circuits in a cable and/or connector are VDE 0100/1.97 411.1.3.2 and DIN EN 60 204/11.98 14.1.3. Observe corresponding technical data found on the product, packing label, supplied documentation, or online. Use tools recommended by Phoenix Contact. Installation notes/Design In documents online must be observed. Use a protective cap for unused connectors. Operate the connector only when fully plugged in. Ensure cable laying does not exceed tensile load limits specified in standards. Observe minimum bending radius and lay cable without twisting. The connector warms up in normal operation; users are responsible for posting warnings if necessary.
Phoenix Contact
Sleeve housings
VARIOCON
VC3
Polyamide
Gray
PL
1852956
4017918127282
Yes (non-returnable)
08
UL 94 V0
NBR
NBR
Stainless steel
IP67
-40 C ... 80 C
Fulfills EU RoHS substance requirements (Yes, No exemptions)
Environment friendly use period (EFUP) No hazardous substances above the limits
REACH candidate substance (CAS No.) No substance above 0.1 wt%
| Product Name | Item Number | Type of Screw Connection | No. of Cable Outlets | Cable Outlet | Shielded | Fixing Screws | Tightening Torque | Width | Height | Length | Thread Type on Seal Side | Locking Type | Mounting |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VC-K-T3-Z - Sleeve housing | 1852956 | Pg21 | 1 | Angled | No | M4 | 1.2 ... 1.8 Nm | 33 mm | 80 mm | 89 mm | Pg21 | Screw | Thread |
| Classification System | Classification |
|---|---|
| ECLASS 11.0 | 27440202 |
| ECLASS 12.0 | 27440202 |
| ECLASS 13.0 | 27440202 |
| ETIM 9.0 | EC000437 |
| UNSPSC 21.0 | 31261500 |
|
|
Phoenix Contact 1852956 Images |